Dake V-16 Manual de Instruções Página 14

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 24
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 13
4/11/2007 14
How to program the digital speed display
(This is factory set and will only need to be programmed if the unit is replaced)
1. Press and hold the set button (top left corner) until the display shows Fun
2. Push the set button one time, the display will read rPS . If the display does not
show rPS then push the “RST” button until the display shows rPS.
3. Press the set button one time, the display will read “P”.
4. Now, open the cover below the digital display and input the numbers 25400
5. Press the set button then RST until the decimal is between the 4 and the 0, now
press the set button and the display will read
6. Push the set button one more time and the display will read “99999” now, push
the RST button until no decimal points are displayed.
7. Push set one more time, it should read “rd15”. If not push the RST button untill it
does read “rd15”.
8. Push set 4 more times. Now the display will read correctly.
Vista de página 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comentários a estes Manuais

Sem comentários